Now it looks like this:

Had a look under the car today, as it made some noise from the left side last race, and there i was: The side engine mount had come off and swinged into the inner cross of the axel. But think I have made a workable solution with a new adjutable "arm" from a wire tension (of a sail boat), a...

Well Gents, Don C is back

1.st place in 5th race, but "only" 4th in race 6 due to some trafic. But most important, everything is working (almost), so now it holiday until August and race 7 & 8.

Some upgrades during the summer, but most maintenance, so looking forward to next race

A short update for this season so far: - Avon tires sucks....!! Way to soft, so back to Toyo. Attached you can see how my left front tires looks after 2 races and 1 qualification. Good thing I checked the wheel nuts before race three - to bad it was only 5min left to start, but found a friend with a...

The front shock was an easy fix, it was just the mounting plates on the foot that broke off, so new foot was ordered. The internal parts was ok

Pål

Bearing sortet out (the new was right, the old total waste), Avon tires on the car, engine in, new exhaust manifold in place, but engine still have the same lack of power as last race... It runs eighter to lean or rich, it's a bit more noise (ratt-ta-ta-ta) and small "poff" even at steady ...

Ok, will try to sort out the bearing issue within short....

In the meantime I need to order new tires. Have been using Toyo R888 the past two years, but is there other experiences with other brands in here? This is the list of approved tires: http://www.corsaitaliana.no/om-corsa-it ... -dekkliste

Slow progress due to new house and moving, but made a trip to the car yesterday and mountet the engine. But, as usual a new challange when checking the left hub and wheelbearing. This is not moving easy enough round, and a new bearing was ordered. Off course, this is not like the one one the car, so...

Great

Pål

Thank guy's!

Any pictures? New top mount is not easy to find, have tried to find a supplier here in Norway and on Ebay, but no luck so far...

Pål

MS3 ordered, but New question - engine mounts:

My engine mounts are "sloppy", so the engine moves a lot when rewing. Is new monunts the answer, or have anyone made another solution for this...?

Pål

Slow progress so far, so hope you can enjoy this promo video for my racing series while you wait for next update on progress...

http://youtu.be/B0njB7YpKHc

SteffenJ3316V wrote:Lots people here use MS Works perfect and affordable prices

Any suggestion on MS 2 vs MS 3? Some money to save on MS 2, but do I also "save" functions I want (maby not now, but in the future)?

Pål

Ok guy's, need your input agian on choosing ECU. The options are:

Megasquirt 3
Megasquirt 2
Haltech Sprint 500

The guy with the dyno know's this systems, so this is not a problem, but my wallet would like your inputs.....

Pål

Engine out and part of this years xmas gift to myself test mounted

When speed is to low, a mean look is a good substitute - but next year.....next year speed will be no issue

Just to give you a quick look at our series here i Norway, here is this years collage

New question: - anyone done an adjustable cam pulley? I know I can buy this, but a bit steep price when you need 4: http://www.gazzellaracing.com/product.php?productid=20245 Thinking about new ECU and to put the engine in a dyno for trimming, and one of the guys asked if the cams are adjustable or i...

Thanks!

Make more sense witth pics

Pål

I see that in another tread here, there is talk about an rear ARB to prevent body roll, but could someone post a pic/explain this to me? Not sure I understand how to do this on an fixed rear axle like the 33....

Pål

From cockpit I feel the engine is missing 10-20% power from 4000 rpm and up. It feels slower and not that responsive as it did earlier this summer. The start was ok, so 1st and 2nd gear worked, but from 3rd and up it strugles. Don't know if it's low fuel pressure, a valve gone bad, exhaust leak or s...

Here is video from race 9, and you can see the difference in speed. A good start from 9th place on the start grid, up to 2nd for a few seconds in turn two, and then down to 4th when the others find their direction again. The 75 have turbo, the Sud carburetors, and the 156 you can see in the drivers ...

Here you can enjoy tha last video, tge summery of 2014

http://youtu.be/LYNJ-QzY2mM

When buying the gearbox, it "was" a 1.2 but based on experience - it's not. It's to close to the original 1.7, but as mentioned there is some difference. My fear is that a 1.2 is running out of gears on the high speed track. Today I shift to 5th 100-200m before the end, so it might be enou...

Last year I just used 4.th gear, this year 5.th on the high speed track - so there must be some difference.

Are you revving out on the bigger circuit, or finding the car will not pull up to the rev ceiling on the biggest straights? I'm thinking back to the point Bryan made earlier, that exiting onto the straights quicker, with the use of an LSD, would change things significantly, but how does your car su...

According to the sheet, with all it's +/- for different settings, I'm currently on: - weight 920kg (could reduce to 853kg according to calculation with original engine) - effect 120,01hk (calculated) - 7,666 kg/hp (calculated) This gives me the window to change ECU and tires to 205/50/15, and end up...

We have a excel sheet to calculate after, and class is result of kg/hp. Class 4 is min 7kg per hp: http://www.corsaitaliana.no/om-corsa-italiana/56-klasseberegning My car weigh 940kg incl driver and petrol when finished, no LSD, original 16V engine, original down pipes, 195/50/15 tires I think I can...

Yes, standard ECU. Have an offer on Emerald ECU, but what will I gain? Any experience on how?

This year it was a "media war" in class 4 before the final raceweekend. It startet with #101 launching this video: http://youtu.be/uzTdfBZOkvA With my reply: http://youtu.be/nK_yyZwioR0?list=UUHNI2R73oOOFRMTr--9llyA Then came class leader #74 with this one: http://youtu.be/MJn3Bz4fH9Q And ...